Tiler Costs in Ireland (2026 Guide): Floors, Bathrooms & Kitchens

Whether you're tiling a bathroom floor, putting up a kitchen splashback, or relaying worn hallway tiles, understanding tiling costs before you get quotes makes all the difference. This guide covers what tilers charge per square metre in Ireland in 2026, what drives costs up or down, and what to look for when comparing quotes.

These figures are researched Irish market estimates for budgeting. Costs vary by project scope, materials and county; get at least three written quotes before starting work.

Typical tilers costs

• Floor tiling — standard tiles (labour per sqm): €30–€55 — Ceramic or porcelain, straightforward layout
• Wall tiling — bathroom or kitchen (labour per sqm): €35–€60 — Splashbacks, shower walls, bathroom walls
• Large format tiles 600mm+ (labour per sqm): €50–€90 — More skill and time required per sqm
• Herringbone or pattern layout (labour per sqm): €55–€100 — More cuts — adds 30–50% to standard rate
• Full bathroom tiling (floor + walls, labour only): €800–€2,500 — 5–12 sqm depending on size and tile choice
• Kitchen splashback tiling (labour only): €150–€500 — Standard metro tiles to full perimeter
• Hallway floor tiling (labour only): €250–€600 — Typical Irish hallway, standard tiles
• Old tile removal (per sqm): €8–€20 — Plus skip hire or disposal cost
• Tiler day rate: €200–€350 — Experienced tiler, labour only

What affects the cost?

• Tile size — large format tiles (600x600mm+) take longer to lay, cut, and align
• Pattern complexity — herringbone, chevron, and diagonal layouts add 30–50% to labour cost
• Surface preparation — uneven or damaged subfloors need levelling compound before tiling can begin
• Old tile removal — if existing tiles need to come up first, budget an extra €8–€20 per sqm
• Waterproofing — shower areas need tanking membranes, adding €400–€800 to a bathroom job
• Number of cuts — rooms with lots of angles, pipes, or alcoves slow down any tiler

Tips before hiring

• Always order 10–15% more tiles than calculated to allow for cuts and breakages
• Ask your tiler to inspect the substrate before starting — unlevel floors are the most common cause of cost overruns
• Agree on grout colour before work starts — it has a major impact on the finished look
• Rectified tiles (precision-cut edges) allow for tighter grout lines and a more modern finish

Frequently asked questions

• How much does a tiler cost in Ireland? Tilers in Ireland typically charge €30–€55 per square metre for standard floor tiles and €35–€60 per square metre for wall tiling. Large format tiles or complex patterns cost more — often €55–€100 per sqm in labour alone. Day rates range from €200–€350 depending on experience and location.
• Is bathroom tiling more expensive than floor tiling? Bathroom tiling tends to cost slightly more per square metre than simple floor tiling because of the complexity involved — multiple surfaces, cuts around sanitary ware, waterproofing requirements, and grout line work. A full bathroom tile job (floor and walls) typically costs €800–€2,500 in labour alone, depending on size.
• Does tiling cost per square metre tell the full story? No — the per-sqm rate is just the starting point. The total cost depends on tile size, pattern, how much cutting is required, whether old tiles need removing, surface preparation needed, and whether materials are included. Always ask for a full written quote before committing.